802.11N 300M Wireless AP Router wifi router

Complies with the IEEE 802.11b/g and IEEE802.11n
1WAN port;4LAN ports
Supports AP client mode
High data rate up to 300Mbps
Chipset:Ralink 3052•Complies with the IEEE 802.11b/g and IEEE802.11n draft 2.0 standards
•1 10/100M Auto-Negotiation RJ45 WAN port, 4 10/100M Auto-Negotiation RJ45 LAN ports, supporting Auto MDI/MDIX.
•High data rate up to 300Mbps network speed
•Supports WDS (Wireless Distributed System) repeater mode
•Supports AP client,Bridge,Gateway mode
•Supports WPS (Wi-Fi Protected Setup) function
•Supports WEP,WPA-PSK,WPA2-PSK encryption security
•Wi-Fi alliance WMM (Wi-Fi Multimedia Enhancement) support
•Supports hidden SSID function
•Obtain WAN IP by PPPoE/DHCP/static IP/PPTP
•Provides DHCP server
•VPN pass through (L2TP/IPSec/PPTP)
•Ignores Ping packets from WAN to LAN ports
•Supports Virtual Server, Special Application and DMZ host
•Supports UPnP, Dynamic DNS
•Supports Flow Statistics
•Supports system status (port connectivity) and remote log for network management
•Shares data and Internet access for users, supporting PPPoE, Dynamic IP, Static IP, PPTP Internet access
•Supports ICMP-FLOOD, UDP-FLOOD, and TCP-SYN-FLOOD filter
•Supports firmware upgrade
•Supports Web management
•Built-in firewall supporting IP address filtering, Port filtering, and MAC address filtering
•Integrated anti-DOS firewall


Technical specifications
Item
Description
Product
Wireless 802.11n Access Point Router
Flash
4 MB
RAM
32MB
Antenna
Detachable 3dBi Antenna x 2 (2T2R MIMO Technology)
Wireless Features
Support IEEE 802.11g, 802.11b and 802.11n draft 2.0 Wireless Access Point
Superior wireless coverage and high performance, up to 300Mbps for wireless data rates
Support WDS, AP, AP Client mode
Maximum coverage distance
100 m indoors;300 m outdoors
Modulation Types Supported
OFDM: BPSK, QPSK, 16QAM, 64QAM, Proprietary MIMO modulation (11n)
DSSS: DBPSK, DQPSK, CCK(11b)
Data Rates Supported
IEEE 802.11b: 1, 2, 5.5 and 11 Mbps
IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
IEEE 802.11n(draft 3.0): up to 300Mbps
Management Features
Firmware upgrade via HTTP
WAN and LAN side connection statistics
Configuration of static routes and routing table
Configuration of NAT
Selection of bridge or router mode
PPP user ID and password
Physical Interfaces
4 x RJ-45 10/100Mbps LAN Ports
1 x RJ-45 WAN Port
1 x power jack
2 x Non-detachable antennas
Router Features
DHCP server and client
NAT (Network Address Translation)
ICMP (Internet Control Message Protocol)
DDNS (Dynamic Domain Name Service)
Security Features
Password protected configuration access
User authentication (PAP / CHAP) with PPP
Support 64/128-Bit WEP encryption, WPA-PSK, WPA2-PSK, WPS and 802.1x
Ethernet Features
Compliant with IEEE 802.3 and 802.3u 10/100 Mbps
All Ethernet ports support auto-crossover (MDI/MDI-X)
Power
9VDC, 1A Single Range Switching Power Adapter
temperature
0°C to 40°C(operating)
–20°C to +70°C(storage)
humidity
10% to 90% non-condensing (operating)
5% to 95% non-condensing (storage