Saturday, September 17, 2011

54Mbps wireless ADSL2+ router, ADSL wireless AP, ADSL wifi device, ADSL wireless ap router, wifi ap (1 RJ11 port, 4 RJ45 port)

Wireless ADSL2+ router, 54Mbps 11G/11B, Chipset: Conexant - CX94610, 1 RJ11 port, 4 RJ45 port



Chipset: Conexant - CX94610
FEATURES:
·Can be set to DSL Uplink mode act as a wireless ADSL2+ Router, or set to Ethernet Uplink
mode act as a wireless Router.
·Complies with G.dmt, G.lite,T1.413,G.992.3(ADSL2),G.992.5(ADSL2+),Annex A or
Annex B standards
·one RJ11 port and one voice splitter
·Four 10/100M LAN ports auto-negotiation & auto-sensing fast Ethernet LAN ports
·IEEE802.11b/g wireless access point
·Supports 64/128-bit WEP and WPA/WPA2 encryption and 802.x security authentication
standards
·Supports Telnet, Local/Remote Web management interface
·Supports VPN pass-through over L2TP, PPTP and IP protocols
·Supports Bridging mode based over 10/100M Ethernet, 802.11g wireless LAN interfaces
·Provides system configuration backup tool
·Supports DHCP Server/clients
·Supports the static IP routing
·Supports IP filtering, MAC address filtering, UPnP, DMZ and IP QoS
·Supports 16 PVC (Permanent Virtual Circuits) entries
·Supports ATM Forum UNI 3.0,3.1 and 4.0 PVC standards
·Supports SNTP protocol to sync your system time with a NTP server
·Supports local administrator, local user and Telnet login
·Supports anti-DOS attack for WAN/LAN, including SYN flooding, IP surfing, ping of Death,
fraggle, - UDP ECHO (port 7), teardrop, land
·Supports Point to Point Protocol (PPP): PAP (RFC1334), CHAP (RFC1994) and MSCHAP
authentication protocols
·Supports Bridge, PPPoE, PPPoA, dynamic IP, static IP, L2TP, PPTP access methods
·Supports auto wireless channel selection
·Supports dual-SSID for public and private wifi access
·Supports Wireless Distribution System (WDS)
·Supports TR-069 settings
·Supports Firmware upgrade
·Product size: 15.2*14.3*3.2cm



No comments:

Post a Comment