Broadband Access User End Wireless Router CPE

Broadband Access User End Wireless Router CPE for EOC Moca
1) 950-1500MHz
2) Support Vlan
3) 3 Qos
4) Support 802.11a/g
Broadband Access User End Wireless Router CPE Function:

MOCA customer premises equipment CPE, which is used to receive and transmit ether messages on MOCA network under the control of NC. Except the VLAN lable adding or removing function and WIFI wireless acess point (AP) function, the equipment also supports network bridge and router two work modes, which is conveinent for multiple hosts to share the same net in a family.

Technical data:
1. Interface Type: a coax input interface, a coax output interface, and two 100M fast ethernet interfaces.
2. Copper Interface Work Frequency: 950MHz~1500MHz, the bandwidth of each frequency channel is 50MHz, there are 23 frequency points available in total;
3. Wireless Protocol: Support 802.11a/g.
4. Work Mode: can be shifted between the layer 2 network bridge mode and router mode.
5. Configuration Mode: Support central office configuration mode and client configuration mode, central office configuration is prevailing;
6. Forwarding Rate: FTP download speed is faster than 60Mbps.
7. Classfication of Service: Three classes of Qos queueings;
8. Support VLAN: support adding or removing VLAN lable for the message.
9. Transmission power: 3dBm, support automatic power control.
10. Receiving Sensitivity: 3~75dBm;
11. Modulation Mode: OFDM, TDMA/TDD, QAM, 256 subcarriers.
12. Insertion Loss: smaller than 1dB;
13. Work Temperature Range: -10~+45°C.