EDUP EP-DR280 54M Wireless Router dd-wrt/Tomato DualWAN

EDUP Wireless USB adapter 54M WEP64/128bit DS-SS 11g
Wireless Lan 11g USB adapter
EEE 802.11g
USB 1.1/2.0
2.4GHz--2.4835GHz
EDUP EP-DR280 54M Wireless Router dd-wrt/Tomato Dual WAN

Description:
EDUP EP-DR280 54M Wireless Router with Broadcom 5354 processor, up to 240MHz of processing speed, is the most perfect support for third-party firmware CPU. 4M Flash can brush most of the common firmware. The router supports dd-wrt newD, tomato ND, as well as firmware, etc.
Feqtures:
·Complies with IEEE802.11b/g wireless standards
·4 x 10/100Mbps Fast Ethernet port for LAN with Auot MDI-X function
·1 x 10/100Mbps WAN port for ADSL/Cable Modem with AUto MDI-X function
·IEEE 802.11b/g infrastructure operating modes
·Dynamic data rate scaling at 11,5.5,2 and 1Mbps for 802.11g mode
·Dynamic data rate scaling at 54,48,36,24,18,12and 6Mbps for 802.11g mode
·allow auto fallback data rate optimized reliability,throughput and transmission range
·Supports wireless data encryption with 64/128-bit WEPstandard for security
·Supports enhance security for WPA-PSk,WPA2-PSK,WPA and WPA2
·Web-based configuration tools and management via WEB Browser
·Supports PPPoE/PPTP/L2TP protocol for ADSL
·Supports NAT for share 1 IP address to all LAN user
·Supports DHCP server/Client
·Supports Firewall protection,Virtual server mapping ,Special application seeting
·Supports UPnP
·Supports statistics information
Product supports the following five major operating mode is definitely your perfect choice to build a wireless network.
1, access point (AP, wireless router mode) - the most basic functions!
Work in access point mode, and general wireless router is the same, both when the routing, but also as a pure AP to use, support for 802.11g 54MBps wireless LAN access. 28MW-251MW adjustable transmit power!
2, Repeater (relay function) - the most useful features highlights!
For the location of the signal not strong enough to place a powerful WRT54G wireless router, you can extend the wireless signal to enhance the wireless coverage area, while the wireless signal into a cable signal, for the other cable access equipment use (in lieu of client) !
Note: the test can relay the wireless router or AP with a D-LINK, TP-LINK, LINKSYS, Belkin, NETGEAR, DWnet, Siemens, Netcore, SMC, Tenda, BUFFALO, NEC, etc.
3, Wireless Client Mode
The reception of radio signals and will no longer transmit signals out, will only receive the received radio signals transformed into cable signal, is like a LAN port with no need to drive the same wireless card (for satellite sharing, XBOX PS2 Wireless Access network or when driving to avoid the use of the wireless network card to the desktop machine) Note: It may be because the firmware or the BETA version of the client in use is not too stable, can be REPEATER mode instead!
4, the client bridge (AP to AP wireless bridge)
Supports two WRT54G with wireless bridge mode to connect two different LAN, set the bridge mode to the other side as long as the AP's MAC to copy into its own AP's "Wireless Bridge" items can be, and this pattern will no longer launch the wireless signal to the other wireless clients to receive. (Suitable for wireless communication between the two buildings in use)
5, Repeater Bridge (bridge relay function)
!!!!!Brush the risks, do not guarantee a bad brush!
Package included:
1 x EDUP EP-DR280 54M Wireless Router
1 x Power Adapter
1 x PATCH CABLE - 1M
The default router IP address: 192.168.1.1, user name: root, Password: admin.